BC Problem

Hello Guys!

Sorry, I posted before, my problem now is a new one.

So I first run BC, and it creates a new pupil for the 2 slots and lvls them up (6 fights)

cool.

as soon as that is done for my two slots, it resets the IP.

i have made a macro to reset my IP bascially by going to the homepage of my router

"C:\Users\username\AppData\Local\Google\Chrome\Application\chrome.exe http://gateway.2wire.net/xslt?PAGE=A08&THISPAGE=A07&NEXTPAGE=A08"

then it clicks on the "restart button"

so since it essentially switches the router off, and restarts it, it takes all up about 120-130s to reconnect.

so i set my delay to 140s. my reasoning was that, since it took 120s to reconnect, but the time 120 secs is up, the internet is back up and that gives BC 20seconds to create new pupil and give it 6 fights before at 140s, it restarts.

but, after 120s when the net is back up, it doesn't create new pupils. leaving 20s where the net is on, but not creating new pupils. at 140s it restarts, not having created new pupils.

can any one give help?

thanks

hbomb

EDIT: my router is a "2Wire 2701HGV-W Gateway"

What I found is that the timer starts when the reconnect EXE or BAT completes, not when the EXE or BAT starts. If you think there is extra time, just keep reducing the time until you find the perfect fit.

2wire? is that u-verse or at&t?

i am using the same method : a script +bc try puttyng your delay to 5
ur delay is 120 seconds of ur reconnect plus 5 seconds

ok. thanks for your help guys

i've tried the delay at 125s. still the same problem :|

my question is, what does delay actually control.

delay = some number to control delay between IP resets

???? = number after internet connection established for BC to create pupil.

Because, it works fine when i first run BC. Then, I can't get the timing right.

If delay = 30s, keeps on asking to reset, but cant as no connection to internet (router still restarting)

If delay = 140s, internet connected for about 20+s, but no pupils created! then restarts.

what actually is delay? is there some way to alter time between internet connection establishment and pupil creation?

thanks

NippleLuvs wrote:

What I found is that the timer starts when the reconnect EXE or BAT completes, not when the EXE or BAT starts. If you think there is extra time, just keep reducing the time until you find the perfect fit.

I haven't found that to be that case. the timer is from the begining of the exe...

hbomb

Well I got this error when I started training by BC:



Can someone solve it?

that's normal dude

no match found = the brute no longer exists. how long since you did combats last? do you password your pupils? if all your pupils are still there and not passworded, those are the bot master's pupils that no longer exist because you are not running combats on them, and with no combats and no password, they get deleted

do any of you know how to get BC to check pupils at levels OTHER than lvl 80?

for example lvl 100, lvl 200 etc.

Thanks
Hbomb

bamb@m wrote:

no match found = the brute no longer exists. how long since you did combats last? do you password your pupils? if all your pupils are still there and not passworded, those are the bot master's pupils that no longer exist because you are not running combats on them, and with no combats and no password, they get deleted

I've found the problem here is the capital letter in my brute name How to get those brutes trained like the brutes without capital letter in name?
Ok. Now I knew the solution is using Brutal Combo Decrypter ^^

hbomb2003 wrote:

do any of you know how to get BC to check pupils at levels OTHER than lvl 80?

for example lvl 100, lvl 200 etc.

Thanks
Hbomb

honestly, I don't. but if you want to focus on the attributes of a particular pupil, that's what fight simulators and inventory previews are for.