Hitskin.com

admin Posts : 2785 Join date : 2009-12-19

COM/FR/ES/DE pupilling script
+
COM/FR/ES/DE server-free BC training method
+
BC 1.3+ database cleaning method

How to use BC to train new COM/FR/ES/DE pupils even when BC server is down and how to create new COM/FR/ES/DE pupils without BC:

PUPILLING: create your COM/FR/ES/DE pupils using Actionaz or Winautomation (+ the Firefox Captcha bypass) and store them in a list.
You may for example use this Winautomation pupilling script for COM/FR/ES/DE (use with Firefox 3.x and not Firefox 4.x):
Spoiler:
1. Decide which 2 brutes you want to pupil and install the Captcha Bypass.
2. Download the Winautomation pupilling script: http://www.fileden.com/files/2012/11/16/3367468/MyBrute-ToolPack.zip
3. Extract the content of the archive to a directory, for example c:
4. Edit the configuration file "Parameters.txt". This file contains:
  
  Master 1 name
  Master 2 name
  Password for master 1
  Password for master 2
  Server for master 1 (COM, FR, ES, DE)
  Server for master 2 (COM, FR, ES, DE)
  Delay in seconds of one whole loop of the script (to be adjusted depending on your required delay between two router resets): decrease this value to pupil faster
5. Configure the router reconnect routine in "RouterReconnect.bat". That procedure should be similar to the one required for Brutal Combo therefore refer to the BC FAQ in case of problem.
6. You need Winautomation (PRO edition to make executables). Open the script "[Release]PupillingBot.xml" in Winautomation and edit the following lines:
  
  Line 4: define the path where you have extracted all the files for the script:
  
  Line 58: define the screen coordinates of the text box containing the pupil name when you create a new pupil:
7. Disable local flash storage: right-click on a flash object (e.g. the picture of your brute), select "Global parameters", and disable any local storage setting from the flash configuration panel.
8. Create an executable file for the script, place it in the script directory, and run it (or run the script from WinAutomation console if you don't have the PRO edition to make executables).
  The XP pupils will be stored in the file "XP_Pupils_List.txt", and the log file will be created in "PupillingBot.log".
  If you want to have custom pupil names then this screenshot gives a hint on how to proceed (don't use a constant prefix longer than 5 characters).
  Note that if you want to stop the executable script then you'll have to kill the process using for example the Task Manager.

TRAINING: use Eumigen's Decrypter + Squirrel to insert the pupils in a empty BC 1.2.02 database. For example:

Spoiler:

Open a vertical list of pupils (e.g. the "XP_Pupils_List.txt" obtained with the bot above) in the MyBrute List Manager and create a list ready for the Decrypter using the tab "Decrypter Input" of the tool (or use a spreadsheet tool):

COM/FR/ES/DE browser pupilling script + COM/FR/ES/DE server-free BC trainer A_tif10

This will produce a list of pupils of the form:

pupil_1_name;1;My_Password_for_all_brutes
pupil_2_name;1;My_Password_for_all_brutes
pupil_3_name;1;My_Password_for_all_brutes
pupil_4_name;1;My_Password_for_all_brutes
pupil_5_name;1;My_Password_for_all_brutes
pupil_6_name;1;My_Password_for_all_brutes
...

Open the Decrypter "BC-Decrypter.exe" in the archive of the bot above and click on the "..." button in order to open the file you have saved at the previous point:

COM/FR/ES/DE browser pupilling script + COM/FR/ES/DE server-free BC trainer A13

Select the server (COM, FR, ES), then click on "create SQL-Inserts". This will generate a file containing the SQL code in order to insert those brutes in a empty BC 1.2.02 database.

This works for DE pupils as well: encrypt your pupils as described above by choosing any domain COM, FR or ES (doesn't matter), then use the MyBrute List Manager (tab "DE Inserts") to transform the SQL inserts obtained from the Decrypter into DE SQL inserts.

Use the "data" folder of the "BC1.2.02_empty_data_folder.zip" file in the release archive of the bot above as a plain empty BC 1.2.02 database.
Follow the procedure described in Eumigen's Decrypter in order to add new pupils using Squirrel in a BC 1.2.02 database. In order to set-up Squirrel, you can have a look here, or you may try SQLWorkbench instead of Squirrel.
Download the Brutal Combo 1.3.00 version here, and replace the "data" folder with the one obtained from the SQL inserts.
Make a backup copy of this database. Now you can use BC to run the fights of the pupils created with the script (after you have properly populated your BC opponents list).
If you later want to add more pupils then always use the BC 1.2.02 database (your backup, or an empty one), not the one that was used with BC 1.3.00 to run fights (you could however reuse a BC 1.3+ database if you execute a drop table brutes2 SQL request).
One big advantage of this route is that it doesn't give any pupil away, and pupilling/training works even when the Brutal Combo server is down.

Make a copy of this database and open it with BC 1.3.00.
Lauch fights!

That way you can as well clean BC 1.3+ databases:

export your pupils using BC (from the BC "Fichier" -> "Exporter" menu),
run the MyBrute List Manager,
erase unwanted pupils with for example a spreadsheet tool,
insert them back in BC 1.2.02 using the Decrypter and Squirrel (see explanations above - in case you have several different passwords you'll need to export the database from Squirrel as well and make joints on IDs, with a particular care for multiple IDs),
open the database again with BC 1.4.01 (to create new pupils with BC when BC works) or 1.3.00 (to train your pupils only).

Reminder:

BC prior to 1.3 cannot download MT pages but the decrypter can be used and BC can launch without server.
BC 1.3 and later can download pages but has new encryption that forbids the use of the Decrypter but BC can launch without server.
BC 1.4 and later requires a server to open.
There is no BC version that can create DE pupils.
Only BC 1.3 can train DE pupils according to the procedure explained above.
If BC 1.4.01 doesn't open there is no way to create pupils using BC.
If BC 1.4.01 opens then you are still subject to potential BC server problems (or restrictions / monthly bandwidth limit).
In order to download old and current Brutal Combo versions you can get them from the official Brutal Combo release topic.
If you want to merge BC1.3+ databases without cleaning then follow this procedure.
If you want to browse in the MyBrute Search Engine the pupils you made using the Winautomation script, you'll have first to get their IDs with the MyBrute List Manager.
For any question related to Brutal Combo itself, look in the BC FAQ.

EDIT: here is another fully integrated non browser based bot that replaces Brutal Combo and the whole script above.

Is possible to do the same for DE brutes? Rolling Eyes

* * * * * * Posts : 120 Join date : 2010-08-15

Thanks For info Razz

Nice info!

admin Posts : 2785 Join date : 2009-12-19

jcelite wrote:: Is possible to do the same for DE brutes?

No.

EDIT: yes, it is possible to train new DE pupils with BC. See first post of the topic.

mm.ok i had thought that yes, because i can still train my .de brutes with the version 1.3.00
else they dont have master

jcelite wrote:: mm.ok i had thought that yes, because i can still train my .de brutes with the version 1.3.00
else they dont have master

you can train .de brutes with 1.3 version ? the 1.3 version was before .de got released.
normally this cant work o.O

€dit: no it was not. did you test to insert your created brutes to a db and train them ?
this would be awesome !

vollaufdienuesse wrote:: you can train .de brutes with 1.3 version ? the 1.3 version was before .de got released.
normally this cant work o.O

€dit: no it was not. did you test to insert your created brutes to a db and train them ?
this would be awesome !

i cant or i dont know how to use decrypter
but, yes i trained them today with version 1.3.00

look this just to show an example Wink

COM/FR/ES/DE browser pupilling script + COM/FR/ES/DE server-free BC trainer Train10

wow u arre nice cool :)

admin Posts : 2785 Join date : 2009-12-19

You can train DE brutes, but you can't add new DE brutes.
You can only add COM/FR/ES brutes.

Why?

BC 1.3 cannot create pupils (DE) because for that it requires the server.
You can't add handmade DE brutes to BC version 1.2.02 because the Decrypter doesn't support DE.
You can't add handmade DE brutes to BC version 1.3.00 because the Decrypter wasn't updated in order to deal with the new encryption algorithm of BC 1.3 and above.
Most likely even if the old version of the Decrypter would work for DE and the import of DE brutes in BC 1.2.02 would work, BC 1..3.00 would not populate the table brutes2 with DE brutes from the table brutes when opening BC (because version 1.2.02 wasn't supposed to contain DE brutes).

EDIT: yes, it is possible to train new DE pupils with BC. See first post of the topic. I was wrong about point 4 above and we are lucky it works that way.

mm ok :)
almost we can still look for brutes in the database.. Razz

Sioc wrote:

You can train DE brutes, but you can't add new DE brutes.
You can only add COM/FR/ES brutes.

Why?

BC 1.3 cannot create pupils (DE) because for that it requires the server.
You can't add handmade DE brutes to BC version 1.2.02 because the Decrypter doesn't support DE.
You can't add handmade DE brutes to BC version 1.3.00 because the Decrypter wasn't updated in order to deal with the new encryption algorithm of BC 1.3 and above.
Most likely even if the old version of the Decrypter would work for DE and the import of DE brutes in BC 1.2.02 would work, BC 1..3.00 would not populate the table brutes2 with DE brutes from the table brutes when opening BC (because version 1.2.02 wasn't supposed to contain DE brutes).

aww this i bad. imo training is the biggest problem of .de till now. i cant train all my pupils on one day even with a delay of 2 secs Sad

admin Posts : 2785 Join date : 2009-12-19

I've edited my first post and released a Winautomation browser-based pupilling bot (works on COM/FR/ES/DE).
Requires Winautomation 2.x (the full version in order to create executables).

If you have Winautomation the bot should be very straightforward to set-up.

* * * * * * Posts : 107 Join date : 2010-04-13

it's possible to train pupils de with BC repartidores do it and it works good for them

Marie

admin Posts : 2785 Join date : 2009-12-19

famatisse wrote:: it's possible to train pupils de with BC repartidores do it and it works good for them

Of course it is.

The initial post was about explaining how to use BC to train when the BC server is down.

Since there is a new BC server running (for how long?) you don't even have to care about the training trick explained here.
Still, the pupilling script + BC insertion trick allow not to give away any XP pupil (especially useful for people playing on FR server).

* * * * * * Posts : 107 Join date : 2010-04-13

thank sioc but i would like to know how training pupils de with BC
if i know hey can i don't know how
i have their explains but i don't understand all

regards

marie

admin Posts : 2785 Join date : 2009-12-19

famatisse wrote:: thank sioc but i would like to know how training pupils de with BC
if i know hey can i don't know how
i have their explains but i don't understand all

That's indeed definitely not the subject of this topic.
As explained above, BC cannot train DE pupils. Forget about the official BC for that (and anyway your DE masters and pupils would get deleted by MT if you cheat).

From the FAQ you can use the Simple Brute Trainer to train non password protected DE brutes, or the Meinbrutalo Trainer to train password protected DE brutes.

EDIT: yes, it is possible to train new DE pupils with BC. See first post of the topic.

The decrypter is working again ?
i have a problem when the decrypter try to take the pupils from the database...

admin Posts : 2785 Join date : 2009-12-19

No. It is not working on BC 1.3+ databases.

admin Posts : 2785 Join date : 2009-12-19

Updated the first post: there is a way to train new DE handmade pupils using a server-free version of BC.

Jeeeeeeee... going to try Bounce

, thankzzzz

Just saw your script... 5 stars Wink

Later going to change, the commands for the reconnect.bat (my .bat is with winautomation)

you don't have by any chance... the winautomationscript for the mass-encrypt DE pupil names. :oops:

i don't understand the variables stuff Razz

Last edited by Gavy™ on Fri 01 Oct 2010, 16:25; edited 1 time in total

check your PM ..

Thank you so muchhhh cheers

EDIT:

It's not working... can you send xlm file? maybe need to change something to work with my pc scratch

admin Posts : 2785 Join date : 2009-12-19

I've updated my first post with a link for a Winautomation script to automatically encode a list of DE pupils with the Decrypter: http://ifile.it/51p6ko0/DE_Encrypt.zip
(should encode about 10 pupils per second unless you've got a problem/delay to get clipboard content)

» FREE BRUTES - If You Have a Bot or Auto-Fight Script, READ HERE!!!
» bot trainer.....
» pupil trainer bot!
» SimpleBrute trainer
» Brute trainer for DE

Hitskin.com

COM/FR/ES/DE browser pupilling script + COM/FR/ES/DE server-free BC trainer