[RELEASE] PUPIL COMMANDER

thx to both creators .

i guess this is the answer to all who waited for brutal borg .

i noticed a little "bug" when i tried to add my brutes with a plain textfile into the db.

name;id;master;server;password but the result was not shown the right way. after i changed to name;id;server;master;password the result was displayed correctly. i had no time to test the bot yet, because i trained my brutes for today before discovering the bot.
which is the correct format for adding the brutes into the db ? the suggested one or the one which displays the entries correctly ?

greetz Vic-Tim

Vic-Tim wrote:

thx to both creators .

i guess this is the answer to all who waited for brutal borg .

i noticed a little "bug" when i tried to add my brutes with a plain textfile into the db.

name;id;master;server;password but the result was not shown the right way. after i changed to name;id;server;master;password the result was displayed correctly. i had no time to test the bot yet, because i trained my brutes for today before discovering the bot.
which is the correct format for adding the brutes into the db ? the suggested one or the one which displays the entries correctly ?

greetz Vic-Tim

I have been using name;ID;master;server;pass since I began testing the training/import part of it.

It will also allow you import as name;1;master;server; This allows a txt to import if the ID is not known and no password. (add password if it is a passworded brute )

Sorted out, all forms thank you very much...

thanks sioc

I get this error with all the webpages:

Could not download the IP getter URL page. Pupil creation skipped.

flipflip wrote:

I get this error with all the webpages:

Could not download the IP getter URL page. Pupil creation skipped.

Biceuri® wrote:

Error

) *** Loop 3 at 29-08-2011 22:35:37
7) Could not download the IP getter URL page. Pupil creation skipped.
6) Pausing for 30 seconds pause while launching the IP resetter.
5) *** Loop 2 at 29-08-2011 22:34:36
4) Could not download the IP getter URL page. Pupil creation skipped.
3) Pausing for 30 seconds pause while launching the IP resetter.
2) *** Loop 1 at 29-08-2011 22:33:34
1) Started pupilling at 29-08-2011 22:33:34

Did you use version 1.0.1? Should be fixed in this version.
Otherwise it means that after your delay + 30 second the connection hasn't come back, i.e. you definitely should increase your delay (the tool checks at most 20 times every 1.5 second if the connection has come back).

Biceuri® wrote:

Sioc i try training with a new list of pupils.

To see what happends,
the pupils that arent mine it says " wrong login " - this is nice i can see what pupils i want to delete.
an the pupils that dont exists, again nice to see what pupils i want to delete.

But how can i fast delete them ?

Using the database manager. Either delete them one by one if you don't have many, or using the database manager 1) export all your database to text, 2) delete them from the database, 3) rework the export using a spreadsheet tool, 4) and import the new list.

Biceuri® wrote:

And the figths for the good Xp pupils doesnt show in Pupil comander window like bc, it's supose to be like this?

Yes, that would just fill up the screen with way too much useless information. Only exceptions are reported on the screen.

Biceuri® wrote:

And a green line for us to see how many time will take to train will be cool, like BC.

While training the number of brutes trained is shown, and the percentage of completion up to one digit which is I think more precise than a progress bar.

Subman(R) wrote:

It will also allow you import as name;1;master;server; This allows a txt to import if the ID is not known and no password. (add password if it is a passworded brute )

Should now be fixed in 1.0.1. You can use name;;master;server; for non password protected brutes if you don't know the ID. Still, will improve the code for import in order to anticipate and automatically correct as many format errors in the input files as possible.

Hi , i can train your brutes , give me a data (.txt) in PM , i train data of your brutes , free !

Morning Sioc,

one question, when i start PC in the morning training. PC check the state of the server and skip the fights for the BE/TM server. Is it possible, that the PC check the state after time again, for example every hour? Then i can insert all domains in the PC and start training at the non BE/TM domains for the first time, after the BE/TM is over in the other domains and the PC check the state of the server o.k. he can train the this pupils too. I hope you understand what i mean!

cheers

the v 1.0.1 is more fast
great !!!!
fast pupiling now
very good update

i get the update and try create pupils again. Now the BE/TM error is away and i get a Network failure with the comment i have to check the delay! I can get a delay of 2 and more minutes but nothing change. My connection is up, i can surf the internet
info i use a usb connection, that works with your web script and with the wincombo without problems!

Subman(R) wrote:

I have been using name;ID;master;server;pass since I began testing the training/import part of it.

It will also allow you import as name;1;master;server; This allows a txt to import if the ID is not known and no password. (add password if it is a passworded brute )

thx for your help.

funny, for my 2nd database the suggested format was displayed correctly.

greetz Vic-Tim

Biceuri® escreveu:
Error

) *** Loop 3 at 29-08-2011 22:35:37
7) Could not download the IP getter URL page. Pupil creation skipped.
6) Pausing for 30 seconds pause while launching the IP resetter.
5) *** Loop 2 at 29-08-2011 22:34:36
4) Could not download the IP getter URL page. Pupil creation skipped.
3) Pausing for 30 seconds pause while launching the IP resetter.
2) *** Loop 1 at 29-08-2011 22:33:34
1) Started pupilling at 29-08-2011 22:33:34


Did you use version 1.0.1? Should be fixed in this version.
Otherwise it means that after your delay + 30 second the connection hasn't come back, i.e. you definitely should increase your delay (the tool checks at most 20 times every 1.5 second if the connection has come back).


The first i ever try i used the version 1.0.0 all ok.
After you realese de new one i tryed and didnt work , and i dint change anyting.
I have always a window with my main router page open, so i know that the connection it's on or off.


i will try later with new version again and give you some feedback

Hello, is it possible to translate the program into other languages (french) ?
Otherwise, thank you very much, it works great!

static IP's are %#@$&@^*

Released version 1.0.2. The following changes are in this release:
- FEATURE: warning if there is a new release available.
- BUG: main form could open minimized.
- IMPROVEMENT: less data downloaded from the remote server.
- BUG: rewrote some parts in order to handle excessive pupil creation delay after router reset.


Hopefully the bug of excessive pupil creation will be fixed. However cannot guarantee correction at the moment because I couldn't reproduce the problem myself.

spagg68 wrote:

one question, when i start PC in the morning training. PC check the state of the server and skip the fights for the BE/TM server. Is it possible, that the PC check the state after time again, for example every hour? Then i can insert all domains in the PC and start training at the non BE/TM domains for the first time, after the BE/TM is over in the other domains and the PC check the state of the server o.k. he can train the this pupils too. I hope

Good idea. This kind of feature as well as scheduled times for daily fights/pupil creation will be added in a later version. For the moment we focus on bug fixes and speed improvement.

La Frite wrote:

Hello, is it possible to translate the program into other languages (french) ?

We do not plan to translate Pupil Commander in any other language.

Just to add, version 1.0.1 and all previous verions will stop working in about 24 hours so please update as soon as possible :)

great speed in updating Sioc nice work.
Thanks for the info niall0s.

Gonna try later on the next version.
hope that the creation works fine for me like in the 1.0.0
i couldnt create in 1.0.1

and in the 1.0.1 at the middle of the train the PComander stops. let's see how it works now

cheers

niall0s wrote:

Just to add, version 1.0.1 and all previous verions will stop working in about 24 hours so please update as soon as possible :)

NP
already running on 1.0.2 and it keeps working great

the creation works great better then ever.
i will try train tomorrow

I have a problem
to attempt to train pupils



What is that?


WELL I HAVE ORDERED MY OPPONENTS
GOOD CONNECTION
OS Windows 7 64-BIT

another problem
suddenly my creation slows significantly
Why did this happen?

NB!!

I have updated the server early due to a potential security risk.

Version 1.0.0 and 1.0.1 will not work any more

Please update to version 1.0.2 to continue pupiling and training like mad bastards :)

Did you pay for the server?

flipflip wrote:

Did you pay for the server?

This tool fully complies with the rule I'm applying since ever with MyBrute: no money/trade/exchange/etc involved.

@Blakallam17: we'll investigate. Can you retry today before doing any IP reset? (PS: ordering opponents and such has no effect at all)

good job, no longer hangs when you try to start and opponents.