[RELEASE]Brutal Combo v1.2.01 (COM/ES/FR)

Subject: Re: [RELEASE]Brutal Combo v1.2.01 (COM/ES/FR) Tue 12 Jan 2010, 11:59

I can see that you mention that you have a static IP ? If yes .. it's impossible that you can use BC unless you use AOl .. but the ratio is very low ..

* Posts : 7 Join date : 2009-09-17

Static IP is the one that changes when you reset the router right?

Subject: Re: [RELEASE]Brutal Combo v1.2.01 (COM/ES/FR) Tue 12 Jan 2010, 12:03

Nope .. Static cannot be change .. Dynamic is the one tah can be change Wink

so which one you got ?

* Posts : 7 Join date : 2009-09-17

Dynamic...Got em mixed up Razz

....When i reset my router the IP changes...

* Posts : 7 Join date : 2009-09-17

So why the "error"?I use the program "resetIP" that is given with the download...It does not change my IP...Not even manually...

Subject: Re: [RELEASE]Brutal Combo v1.2.01 (COM/ES/FR) Tue 12 Jan 2010, 12:09

check your PM Wink

* Posts : 7 Join date : 2009-09-17

Check your pm :)

* * * * Posts : 40 Join date : 2009-12-20

Yaboirobby wrote:

Hades wrote:: It shows me that error:

ERROR "the name of the brute".mybrute.com

i went to the page and saw that it created the pupil but it didn't do tha fights.

When i push "combat" it will do them? or i have to do them manually?

Thanks in advance!

When you push combats, it will complete the fights if you have opponents in the opponents.txt file.

Thanks!!!! Wink

* * * * Posts : 40 Join date : 2009-12-20

Ok new problem!!! And it started to be really annoying everytime.... Evil or Very Mad

I changed ISP and router and i am getting after it makes a pupil and after it resets to get new IP it gives this message..." ERROR Time connection ping out : connect"

I searchedd the web a little for changing the DNS timer but i don't have a clue where it is at windows 7. Also i am using winautomation at virual XP.

Any ideas????

Subject: Re: [RELEASE]Brutal Combo v1.2.01 (COM/ES/FR) Wed 13 Jan 2010, 22:20

Sometimes my bot gives the error:
ERROR when trying to access webservice: <html>
blablabla and a bunch of html code

and the bot stops.

Has this ever happened to anyone else?

Subject: Re: [RELEASE]Brutal Combo v1.2.01 (COM/ES/FR) Wed 13 Jan 2010, 23:08

yeah, I've had that happen a couple of times, not too often, but still annoying since it usually happens when I'm at work and I end up losing a few hours of pupiling.

Subject: Re: [RELEASE]Brutal Combo v1.2.01 (COM/ES/FR) Thu 14 Jan 2010, 08:03

Doft wrote:: Sometimes my bot gives the error:
ERROR when trying to access webservice: <html>
blablabla and a bunch of html code

and the bot stops.

Has this ever happened to anyone else?

Yes, from time to time the Webservice which BC use to create pupils is not available, because of maintanance or what ever, and then you get that error. The only chance you have is to restart it a bit later again and see if it's working again.

You can use that time to train your pupils, because the training runs without the webservice Wink

Subject: Re: [RELEASE]Brutal Combo v1.2.01 (COM/ES/FR) Thu 14 Jan 2010, 15:03

Doft wrote:: Has this ever happened to anyone else?

Yes, I think this is because ES is down!

* * * * Posts : 40 Join date : 2009-12-20

"The connection timed out" error how can we fix it???

please help!!!

Subject: Re: [RELEASE]Brutal Combo v1.2.01 (COM/ES/FR) Thu 14 Jan 2010, 18:51

Hades wrote:: "The connection timed out" error how can we fix it???

It would help if you give us a bit more informations, COM and FR work fine for me, but ES is down!
It was down as I went to work this morning and it's still down.

* * * * Posts : 40 Join date : 2009-12-20

Eumigen wrote:

Hades wrote:: "The connection timed out" error how can we fix it???

It would help if you give us a bit more informations, COM and FR work fine for me, but ES is down!
It was down as I went to work this morning and it's still down.

It goes with that order.

The bot makes a pupil(only one) then the winautomation changes the IP and then the bot says "The connection timed out" and continues with winautomation to change the IP again without making any pupil.

In case someone gets this error try to disable the routers' firewall.

At least it worked for me.

Subject: Re: [RELEASE]Brutal Combo v1.2.01 (COM/ES/FR) Fri 15 Jan 2010, 08:16

Hades wrote:: ...
In case someone gets this error try to disable the routers' firewall.

At least it worked for me.

Yes, a firewall can be a problem ...
nice to read that it's working now Bounce

Subject: Re: [RELEASE]Brutal Combo v1.2.01 (COM/ES/FR) Tue 19 Jan 2010, 01:25

Since I train many DB's I have the opportunity to monitor the leveling process. What I am noticing is the non-training of some(remains at level 0) and the stop leveling of some. These may stop at any level. That is allot of EXP being wasted. I have gone into the cells to try and figure this issue out but can't. While in the cells I can manually fight them and they will level. Why can't BC?

Ok Master of DB"s....noodle on this one. scratch

Subject: Re: [RELEASE]Brutal Combo v1.2.01 (COM/ES/FR) Tue 19 Jan 2010, 08:07

Hi Subman,

Subman(R) wrote:: ...
Ok Master of DB"s....noodle on this one.

Well, I think that is a BC-Problem, not a problem of BC-Decrypter or BC-Opponentchecker Laughing

I'm not one of the makers of BC, but I hope I can help you finding the cause for that problem.

You write you can fight them manualy in the cellule, so they are there and not deleted by MT, and that is fine.
Please answer a few Questions:

Do the Pupils have a password?
Do the pupilnames contain capital letters?
Do you have enough opponents, one level below than the pupils who will not fighting with BC, in your opponents.txt?

greetz
Eumigen

Subject: Re: [RELEASE]Brutal Combo v1.2.01 (COM/ES/FR) Tue 19 Jan 2010, 09:56

The answer to questions is yes no yes.

I verify the opponents list about every three days for completeness and filled to level 25.

Several db's are your merging.(mine and others).

admin Posts : 2785 Join date : 2009-12-19

I mention the same problem as Subman has reported with the same yes no yes answer. But in my case I didn't even use Eumigen's database tool. Just a plain BC database that skips some fights (not much, at most 2% of my pupils are affected, and those are not the pupils donated to BC team).

Subject: Re: [RELEASE]Brutal Combo v1.2.01 (COM/ES/FR) Tue 19 Jan 2010, 12:04

@ sub and all who have pupils stuck @ lvl 0:

I have found myself in the same situation, and all I have to do is do one fight to take those pupils to lvl 1, and then bc will take over and do all fights every day after that. I agree with eumigen that it is an error in the webservice or something, since there are other pupils in the same db that start at lvl 0 and will still do their fights, no problem...

so, sort your pupils by level, pick the ones stuck at lvl 0, and either do them all manually by hand, or if you happen to have it still, use BTB's QTP script, but this is only necessary for their first fight (you can choose to do all three if you like), and after that, those pupils should be fighting just fine in bc.

Subject: Re: [RELEASE]Brutal Combo v1.2.01 (COM/ES/FR) Tue 19 Jan 2010, 12:14

Guess I am about to get busy... lol!

Last edited by bamb@m on Tue 19 Jan 2010, 23:57; edited 1 time in total

I got an idea, and it's a two part thing. it may also be possible it's a db error, rather than a bc error, so try this:

1) find just one pupil stuck at lvl 0

2) put it in a blank db and try running fights.

3) if you see the same error I usually see when bc refuses to train a lvl 0 (not enough opponents at lvl 0, even when I have six), then it is not a db error, and is instead more likely a bc error.

4) if you do not see that error, and the pupil gets trained from lvl 0, then perhaps the same can be done for those high level pupils not being trained as well.

so, if changing the pupil from one db to another fixes the problem, and you have a bunch, rather than taking all the high level and lvl 0 not fighting and putting them in a db to "jumpstart" their fights again, it may be faster to just export the entire db and put it in a blank one to refresh the whole thing. if not, yes, it will be a lot of manual labor scratch

I'll check your results tomorrow. time for some sleep before work... :sleep:

Subject: Re: [RELEASE]Brutal Combo v1.2.01 (COM/ES/FR) Tue 19 Jan 2010, 12:50

Dang weird forum. Deleted

Will try your suggestion

» [RELEASE]Brutal Combo v1.4.01 (COM/ES/FR)
» how to used brutal combo bot
» Can brutal combo do this?
» BRUTAL COMBO AK?
» brutal combo help