[RELEASE] PUPIL COMMANDER

spagg68 wrote:

Hi Sioc,

The IP getter: http://siocip.somee.com/siocip.asp don't work at the moment! Can you check please?

thank you

You can put a different one, like: http://ipcheck.org/ or http://whatismyip.org/...

CmIsUa wrote:

spagg68 wrote:

Hi Sioc,

The IP getter: http://siocip.somee.com/siocip.asp don't work at the moment! Can you check please?

thank you

You can put a different one, like: http://ipcheck.org/ or http://whatismyip.org/...

Hi Carlos,

this IP getter don't work for me

For me too.

Try this: http://www.whatismyip.com/


138) Your IP was banned on FR. Skipping to next master.
137) New IP: 84.7.178.165
136) Could not download the IPGetter URL. Attempt 1/10, next attempt ends in 10 seconds.
135) Your delay is too short (40 secs). Attempt 1/40, next attempt ends in 3 seconds.
134) Pausing for 40 seconds while launching the IP resetter.
133) *** Loop 11 at 22/11/2011 09:53:04

Ligne 135 and 136 but connexion is good i see my adress ip before 40 seconds and ligne 138 always the same problem and it create for the second master and sometime for none but do fights.

Hi Sioc
because I get this error?

Thx, Rodkarol.

I just wanted to make a screenshot.
I got the same error-message, since 30-45 minutes. Before it works great.

What could it means?
Edit: Internet Connection works fine.

Rodkarol wrote:

Hi Sioc
because I get this error?

I have the same problem happens?


SIOC reply pliz hurry!!

Maybe maintenance? - let us wait a while

So, with Static IP I can't use this program? Because my IP doesn't change. Isn't there anything to do?

attention the problem is already solved!

There was an issue with the connection to the host. You need an internet access in order to launch Pupil Commander.
Check your internet connection, and retry to open Pupil Commander.
Pupil Commander will now close.

Debug step:
Dim enc As New Systemn.Text.UTF8Encoding()

Error message:
System.Net.WebException: No es posible conectar con el servidor remoto---> System.Net.Sockets.SocketsException: Se produjo un error durante el intento de conexión ya que la parte conectada no respondió adecuadamente tras un periodo de tiempo, o bien se produjo un error en la conexión establecida ya que el host conectado no ha podido responder
en System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
en System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address,
ConnectSocketState state, IAsyncResult asyncResult, Int32 timeout, Exception & exception)
--- Fin del seguimiento de la pila de la excepción interna---

Server stack trace:
en System.Net.HttpWebRequestStream(TransportContext& context)
en System.Net.HttpWebRequestStream()
en System.Runtime.Remoting.Channels.Http.HttpClientTransportSink.ProcessAndSend(IMessage msg,ITransportHeaders headers, Stream inputStream)
System.Runtime.Remoting.Channels.Http.HttpClientTransportSink.ProcessMessage(IMessage msg,ITransportHeaders requestHeaders, Stream requestStream, ITransportHeaders& responseHeaders, Stream& response Stream)
en System.Runtime.Remoting.Channels.SoapClientFormatterSink.SyncProcessMessage(IMessage msg)

Exception rethrown at [0]:
en System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
en System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
en RemoteInterfaces.IFactory.V()
en PupilCommander.MainForm.L()

All issues above are just related to a temporary unavailability of the host somee.com. Everything should be fine now (including the IP getter).

What about static IP, can I use your program with it normally?

No, you can't use it "normally". Your IP will be banned by Motion Twin for one day after a given number of page downloads, i.e. you will only be able to train a few (about 100) pupils before IP ban and you will not be able to create more than 2 pupils with experience on each server. I would not advise to use the tool if you have a static IP. More information in the built-in help of Pupil Commander.

Sioc wrote:

No, you can't use it "normally". Your IP will be banned by Motion Twin for one day after a given number of page downloads, i.e. you will only be able to train a few (about 100) pupils before IP ban and you will not be able to create more than 2 pupils with experience on each server. I would not advise to use the tool if you have a static IP. More information in the built-in help of Pupil Commander.

Those of us with static IP's get screwed over yet again: 1) we had to pay for pups; 2) we can't even train the pups we paid for

yes Dice, having a static ip is

why i get "Could not read the IP from the IP getter URL" and when i enter the site thru google it works fine?

OviTron wrote:

why i get "Could not read the IP from the IP getter URL" and when i enter the site thru google it works fine?

Maybe you only have to increase the delay-time for your Router in the PC? (I-Net Connection is not up when the "Get IP Request" is sent) ?

pfosten69 wrote:

OviTron wrote:

why i get "Could not read the IP from the IP getter URL" and when i enter the site thru google it works fine?

Maybe you only have to increase the delay-time for your Router in the PC? (I-Net Connection is not up when the "Get IP Request" is sent) ?

Moreover not all IP getters do work, even if you can read the IP from the browser. Best would be to use one of the IP getters in the built-in help of PC.

New version 1.2.3 available.
This is mainly a minor bugfix update version:

1.2.3 (2011.11.26)
- BUG: shouldn't crash anymore if all servers are in BE/TM/IP ban state.
- BUG: routine to check for BE/TM/IP ban should be a bit more robust and be less prone to partially working internet connections.

Why does it still gives me that I need to update? I downloaded it and it still writes it...

Thank you for this new version.

How fast should not update the pupil commander, is annoying.

Yes, I do understand, especially if there are no major new features to be released. However, last update was about 20 days ago which I think is long enough, and bugs that were fixed are imo even more annoying than just having to replace the exe for the update :-)

Hello mine computer is laptop, and I'm using Dial-up (modem). How should I create reconnect.bat?

Would this work?:

:again
For /F %%i in ('printip') Do @Set IP=%%i
rasdial Connection name /DISCONNECT
rasdial Connection name username password
for /F %%j in ('printip') Do @set IPNEW=%%j
if %IP% == %IPNEW% GOTO AGAIN

OR:

@ECHO OFF
color A
@ECHO RECONNECTING (IP switch) ... please wait...
echo.
rasdial"[CONNECTION]" /disconnect
@Echo DialUp disconnected, will reconnect in 8 seconds.
echo.
PING 1.1.1.1 -n l -w8000 >NUL
rasdial "[CONNECTION]" [USERNAME] [PASSWORD]
exit

BUG!

me open:

or